> ## Documentation Index
> Fetch the complete documentation index at: https://docs.seam.co/llms.txt
> Use this file to discover all available pages before exploring further.

# 2N System Set Up Instructions

> Connect your 2N intercoms to Seam by preparing a My2N Company Admin account, adding your devices, and enabling Remote API Access.

## Prepare My2N Account for Seam Integration

<Warning>
  To connect 2N devices to Seam, you must use a Company Admin account with multi-factor authentication (MFA) disabled.

  If MFA is required for your admin account, create a separate account without MFA for dedicated API communication.
</Warning>

***

### Set up steps

1. **Create a My2N account**\
   [Sign up for a My2N account](https://my2n.com/2n-remote-configuration) if you don't already have one.
2. **Add your 2N devices**\
   In My2N, add your 2N IP devices to the account.
3. **Enable Remote API Access (RAA)**\
   Make sure Remote API Access (RAA) is enabled for your company. If it's not, contact [integrations@2n.com](mailto:integrations@2n.com) to activate it. Provide the company ID, which is located in the URL.

***

### Enable HTTP API for each Device

Repeat the following steps for each 2N device you want to control through Seam.

1. **Open device configuration**
   * In My2N, go to **Devices** in the left sidebar.
   * Click the **three-dot icon** next to your device and choose **Open configuration**.\\
   * When prompted, log in with the device’s credentials:
     * Default username: `Admin`
     * Default password: `2n`
     * (Use custom credentials if they were changed during installation.)

2. **Enable HTTP API services**
   * In the device dashboard, click **Services**.
   * From the sidebar, select **HTTP API**.
   * On the **Services** tab, make sure all of the APIs are enabled, with

     **Connection Type** set to **Secure (TLS)** and **Authentication** set to **Digest.**

3. **Create API credentials**
   * In the top toolbar, click on **Account 1**, or another available account.
   * Enable the account.
   * Create a **Username** and **Password**.
   * In the **User Privileges** section, ensure both **Monitoring** and **Control** boxes are checked for all listed options.
   * Click the Save (💾) icon in the bottom-right corner to confirm.

<Info>
  **Note**: the **Username** and **Password** created in this step will be used
  when connecting your device to Seam, please log and remember them.
</Info>

***

## Connect Webview Instructions

The Seam Connect Webview is where you securely link your My2N account to Seam.

This connection lets Seam manage and update your 2N intercom devices.

1. **Select My2N**\
   In the Seam Connect Webview, select **My2N** from the list of brands available.

2. **Enter your Company Admin credentials**
   * Enter the Company Admin My2N email and password for your property’s My2N account, then click **Submit**.
   * **Note:** Use an account with multi-factor authentication (MFA) turned off. If your main admin account requires MFA, create a separate account without MFA for this connection.

3. **Choose which devices to connect**\
   The Webview will show all 2N devices under your My2N company.

   If a device doesn’t appear, check that it’s been added and that the HTTP API is enabled.

   Select the devices you want to link to Seam, then click **Submit**.

4. **Authorize device access**\
   For each selected device, enter the **Username** and **Password** you created in the [Enable HTTP API for Each Device](#enable-http-api-for-each-device) section.

   This step confirms that Seam can securely communicate with your 2N devices to perform actions like unlocking doors or managing access codes.